TOA RM-200M Remote Microphone for VM-2120 & VM-2240

The TOA RM-200M remote paging microphone is designed for use with the VM-2120 and VM-2240 amplifiers.

Any of the 5 zones can be paged individually or simultaneously in the case of an emergency. Pre-recorded messages or an emergency message on the optional board can also be broadcast via the ‘Emergency Switch’.

Enquiry

Categories: Microphones, Multi Zone Paging System

Description

Specification
Power Requirement	24 V DC (12-30 V DC), (Supplied from VM-2000/VM-3000 Amplifier or local power suppy.)
Distortion	Less than 1%
Frequency Response	100 – 10,000 Hz
Distortion	Less than 1%
Signal-to-Noise Ratio	More than 60 dB
Audio Output	0 dB*1, 600 Ω, balanced
Microphone	Unidirectional electret condenser microphone, gooseneck type.
Speaker Zone Control	Zones 1-5 (Zones 1-10 with 2 stacked amplifiers) Groups 1-2, and All-Zone Broadcast
Emergency Broadcast	Activation of Emergency Broadcast (pre-recorded announcement*2 or live microphone announcement) by Emergency Switch
Voice Announcement Board Control	Activation of 5 messages*2
Number of Connectable Units	Up to 4
Communication System	RS-485
Volume Control	Microphone volume control
Connection Cable and Connector Category	5 STP cable, RJ45 connector
Communication Distance	800 m maximum in total
Finish	ABS resin
Dimensions	190 (W) × 75.7 (H) × 21.5 (D) mm (Gooseneck microphone excluded)
	1 0 dB = 1 V 2 An optional EV-200 Board must be mounted in the VM-2120 or VM-2240 Amplifier.